My AccountLogin +

Monitoraggio online

La sorveglianza permanente dei trasformatori nella rete è una tecnologia collaudata per prevenire interruzioni o danni imprevisti. Le attività di scarico parziale di livelli sospetti sono indicatori di un guasto imminente o di un guasto del sistema. Gli strumenti di monitoraggio di Power Diagnostix offrono allarmi e messaggi di preallarme per prevenire tali interruzioni.

Monitoraggio della scarica parziale su Transformers

Partial discharge monitoring has become increasingly important in the past few years. Besides other parameters like gas in oil analysis, temperatures, vibrations, or load conditions, etc., the PD trending information completes a full set of monitoring data of a transformer in the field. A series of standard bushing adapter (BA) is available to connect the measurement system to the test tap of condenser bushings. Even special designs are available on request. Additionally, the standard setup using the bushing test tap could be extended with UHF drain valve sensors or embedded antennas in flanges. For continuous monitoring, an instrument such as the ICMmonitor can be considered. Acoustic sensors can be used to locate a PD fault more precisely.

Schema di collegamento per sistemi di monitoraggio di scariche parziali

Beside of the preferred HF PD decoupling from the capacitive test taps of the transformer bushings (BA & BCU2C), it can be an option to take the UHF signal in addition or instead. Suitable UHF PD sensors are available from Power Diagnostix for the oil drain valve (TVS2) or for flanges of inspection holes (TFS1). The advantage of less influence of external noise signals stands in contrast to the lower detection sensitivity of PD activity generated from failures from within the winding. However, a combination of both techniques can be considered as a good compromise.

BCU2
TVS2
TFS1