My AccountLogin +

HVcontrol

Unité de contrôle d'essai à haute tension

Contrôle des installations de test haute tension

HVcontrol

The HVcontrol unit combines all standard functions required to manually operate a high voltage transformer. It includes a safety contact loop, the measurement of primary and secondary current, as well as of the primary voltage. User-settable limits for the primary and secondary current trip the main circuit breaker. The safety loop, as well as the emergency stop is hard-wired and equipped with forced contacts.

Due to its flexible design, the HVcontrol can be used on any high voltage test set. Especially, in case of the modernizationof old test sets, the HVcontrol offers a multitude of improvements if compared with conventional relay based controls.

The unit comes with rigid solid-state piezo push buttons. Each of these control buttons has an illuminated ring to indicate the state of the function controlled by this specific button. This allows an easy and intuitive operation of the HVcontrol.

The HVcontrol comes in a 19"-subrack (3HU). This makes it an easy replacement of older controls having the same size. On its rear panel, the HVcontrol offers conveniently detachable screw terminals for the different controls and optional instruments.

Modular Concept

Besides a mere drop-in replacement of an old control, the HVcontrol can be combined with other test instruments of Power Diagnostix to build a fully automated acceptance test environment. It can be ordered with several optional functions e. g. for STEP tests, TTL gating. It's also possible to deliver the HVcontrol with a SCOPE display.

Further, the instrument can be combined with the ICMcompact for partial discharge testing and with the TDAcompact for tanδ and capacitance measurements.

Power Diagnostix also provides industrial PCs to control the combination of instruments. Depending on the application and its requirements, the instruments can be mounted in desktop enclosures, 19" racks, or control desks fitted with 19" mounts.

Logiciel HVpilot

The HVpilot software allows the complete supervision of a high voltage test sequence. Further, the software offers convenient programming and editing of the test sequences. Additionally, this software can connect to the ICMcompact to read the partial discharge level and to the TDAcompact to read the tanδ as well as the capacitance of the device under test. An export function allows to save the acquired data in file formats for MS-Excel and MS-Word.