My AccountLogin +

CAL2 Series


Power Diagnostix calibrators enjoy all the advantages of 20 years' experience in calibration services. The broad range of easy-to-use and robust units for many different applications ensures reliable PD measurements compliant to international standards, such as IEC 60270 and CISPR 18-2.

Calibrators for PD Measurements on GIS

Special signal sources are available for GIS measurements using UHF, such as the CAL2A: 0.5/1/2/5/10/20/50 pC, rise time max. 200 ps, and f3dB min. 1.5 GHz.

Three other models are available with voltage output, the CAL2B: 2/5/10/20/30/40/50 V, CAL2C: 1/2/5/7/10/12/15/17/20 V, and CAL2D: 5/7.5/1015/20/30/40; Z = 50 Ω, rise time max. 200 ps, tF = 100 ns.

The rise time of the calibrators CAL2B/500, CAL2C/500, and CAL2D/500 is typically 550 ps.

DAkks calibration mark

Power Diagnostix delivers the calibrators of the CAL2 series with a fully traceable DAkkS calibration. This calibration certificate guarantees that the deviation of the voltage output from its nominal value is less than 30 mV + 0.03 × u, with 'u' being the displayed value.

Additionally, Power Diagnostix offers a cost-effective factory calibration, if the formal traceability is not required. The calibrator is re-adjusted, if necessary, and outfitted with a new battery.

To ensure a reliable PD measurement, all calibrators shall be calibrated annually.

The standard calibrators of Power Diagnostix' CAL2 series are listed in the table below, along with their ranges and key features.

Standard calibrators of the CAL2 series (zoomable)